北京譜飛科技有限公司專業供應德國耶拿Analytik Jena原裝空心陰極燈/石墨管/霧化器/樣品杯等耗材配件,常用耗材配件現貨供應,訂貨快,貨期短,到貨快,原裝正品,質量保證。
德國耶拿空心陰極燈采用了高標準精心制造,由德國耶拿精心打造,每一支燈具都經過嚴格的測試,確?蓾M足***嚴苛的要求。所有空心陰極燈都經過嚴格測試,以確保光輸出、高強度、高穩定性和光譜純度標準。
1 空心陰極燈出廠前通常廠家要進行老化(出廠前持續點亮數十小時,以使燈的性能達到),若用戶發現購買的新燈的性能差別較大,需要在用戶現場進行一段時間的老化后,再對燈的性能進行判斷。
2正常使用過程中若進行電流調節,應緩慢進行,驟然將燈電流升高可能導致陰極表面發生噴射,影響燈的使用壽命,嚴重時還會使陰極破壞。
3 空心陰極燈如長期擱置不用,將會因漏氣、氣體吸附等原因而不能正常使用,甚至不能點亮。因此,建議每隔3個月將不常用的燈通電點亮2—3小時,以保持燈的性能并延長其使用壽命。
6 空心陰極燈一旦打碎,陰極物質暴露在外面為了防止陰極材料上的某些有害元素影響人體健康,應按規定對有害材料進行處理,切勿隨便亂扔。
Zirconium (Zr) 480-450.068
CONSUMABLES AAS/AFS | 2013
Analytik Jena AG | Konrad-Zuse-Str. 1 | 07745 Jena/ Germany | www.analytik-jena.com | info@analytik-jena.com
AFS
mercur
AAS I HR-CS AAS
novAA? series
ZEEnit P series
contrAA? series
Catalogue CONSUMABLES
Atomic Absorption Spectrometry
Please choose your Consumables list.
analytikjena
Consumables
AAS
1 / 60
Order number Description
GRAPHITE TECHNIQUE
Graphite material / furnace spare parts
[ vario 6 ; novAA 400 ; contrAA 700 ; contrAA 600]
407-A81.018 2 Pair graphite electrode (4 pieces)
407-A81.024 Graphite shroud, pyro-coated
407-A81.011 Pack of 10 pieces graphite tube, coated
407-A81.025 Pack of 10 pieces graphite tube with PIN-platform
2 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-A81.020 Pack of 5 pieces Graphite pipetting insert
solid sampling
[ vario 6 ; novAA 400 ; contrAA 700 ]
702-A81.391 IC-graphite shroud solid (necessary for solid sampling), pyro-coated
702-A81.392 Graphite sealing cap for the furnace in the solid analysis 1 pieces
702-A81.314 Adjustment aid (external) novAA, contrAA
702-A81.394 Adjusting aid (internal) novAA, contrAA
3 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.023 Pack of 10 pieces Z-graphite sample platform (solid), pyro-coated
407-A81.303 Pack of 10 pieces solid graphite tube, pyro-coated
407-A81.320 Spectral graphite powder, 25 g
Replacement parts furnace
407-A81.021 Bag with 2 pieces O-rings for the furnace, ceramic
702-A81.045 Adjusting insert
407-142.312 Furnace windows contrAA 700, 1 pair
from SN: 161K0335
4 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A81.002 Furnace windows, 1 pair (novAA 400, vario6)
407-10-1610-679-14 Sample compartment windows contrAA 300/600, 1 pair
407-150.598 Sample compartment windows contrAA 700, 1 pair
702-A81.234 Screwed gas fittings, 1 x long
702-A81.233 Screwed gas fittings, 2 x short
Graphite material ZEEnit
Graphite material [ ZEEnit 600/650/700 ] and all upgraded systems ZEEnit 600s/650s
all tubes are pyrolytically coated
5 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.342 Pair of Z-electrodes (1x above, 1x below)
407-152.314 Pack of 10 pieces Z-graphite tube with PIN-platform, long
407-152.315 Pack of 10 pieces Z-standard graphite tube
407-152.346 Pack of 5 pieces Z-graphite insert
407-152.324 Set of graphite parts furnace
Set 1 ZL-graphite shroud, 2 electrodes and 1 pipetting insert
6 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.340 Z-graphite shroud liquid
solid sampling
407-152.540 Adjusting aid (external), solid, ZEEnit
407-152.599 Adjustment aid (internal), solid, ZEEnit
407-152.023 Pack of 10 pieces Z-graphite sample platform (solid), pyro-coated
407-152.316 Pack of 10 pieces Z-standard graphite tube, solid
7 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.307 Pack of 5 pieces Z-graphite sealing cap (solid)
407-A81.320 Spectral graphite powder, 25 g
407-152.341 Z-graphite shroud, solid
Replacement parts graphite furnace ZEEnit
[ ZEEnit 600 ; 650 ; 700 ; 650P ; 700P und 600 S ; 650S ]
407-152.020 Bag with 3 pieces seal rings 11.6 mm x 1.2 mm for the furnace
407-152.541 Adjusting aid (external), liquid, ZEEnit
407-152.022 Furnace windows, 1 pair (left, right) (ZEEnit 60/65)
8 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.576 Furnace windows, 1 pair (ZEEnit 600/650/700)
Replacements for graphite autosampler MPE
MPE 60 [ novAA 400; ZEEnit ]
for serial number in format XX.XX.XX
407-230.069 Dosing unit 500 μl
407-401.590 Dosing tube MPE (MFA)
9 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-230.067 Wide neck bottle 750 ml
407-230.073 Pack of 10 pieces PP-sample cup, 5 ml
407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces
407-230.075 Pack of 10 pieces PTFE- sample cup, 2 ml
10 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-230.072 Pack of 10 pieces PTFE-special cup, 5 ml
407-230.078 Set tubing guide (Ti cannula with PTFE tubing and PEEK tube)
MPE 60 [ novAA 400 ; ZEEnit ; contrAA 700 ]
for serial number in format XXX.XXX and XXXXXXXXXX
407-402.597 Inlet tube PTFE (bottle-valve)
407-403.158 Dosing unit 500 μl
from S/N 703.801 (March 2007)
11 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-230.069 Dosing unit 500 μl
407-401.590 Dosing tube MPE (MFA)
407-230.073 Pack of 10 pieces PP-sample cup, 5 ml
407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces
12 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-402.595 Sample tray standard / 89 Positions
407-230.075 Pack of 10 pieces PTFE- sample cup, 2 ml
407-230.072 Pack of 10 pieces PTFE-special cup, 5 ml
407-402.593 Tubing guide for dosing tubing
407-402.594 Tube fixing for autosampler arm
407-402.596 Sample tray cover
13 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-233.912 Wide neck bottle 1,000 ml (with cap)
Furnace Tools
Furnace Tools - Sets
407-A60.066 Tool kit novAA400 / contrAA 700 /contrAA 600 / vario 6
consisting of:
- Key 7-40
- Reducing die for electrode
- Reducing die for shroud
- Spindle
14 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-152.300 Tool kit ZEEnit 600/650/700
consisting of:
- Screw extractor
- Reducing die tool
- Adjustment tool
- Adjusting insert
Replacements Tools ZEEnit
407-400.409 Mechanic's mirror
407-401.404 Tweezers (titanium)
407-401.045 Screwdriver 5.5 x 1.0
15 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-401.036 Key 7-40
(ZEEnit 600/650/700/650P/700P)
407-401.039 Change-over ratchet
(ZEEnit 600/650/700/650P/700P)
407-401.037 Extension 1/4"
(ZEEnit 600/650/700/650P/700P)
FLAME TECHNIQUE
Burner-Nebulizer-System
(Teflon, PEEK)
702-A63.623 Seal rings for siphon and mixing compartment
16 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.621 Seals rings for nebulizer
407-160.411 Replacement-set 2 for scraper
(1x plug plate, 3x screws, 3x nuts, 3x washers)
702-A63.626 Impact bead, 2 pieces
407-140.177 Impact bead, PTFE coated, 1 piece
(to work with HF)
702-A63.101 Spare parts for burner acetylene/air (Ti screw and spacer)
702-A63.103 Spare parts for burner acetylene/N2O (Ti screw and spacer)
17 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.641 cap nebulizer (PEEK)
702-A63.625 Pack of 5 pieces cleaning wires
702-A63.624 Pack of 50 pieces cleaning rods
407-140.030 PEEk spray chamber (recommended for difficult sample matrix)
407-111.001 Quartz tube for HPT burner head (5 cm slit length)
18 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.204 Cleaning part for burner acetylene/N2O (long version)
407-A63.505 Screw (PEEK) for Syphon (special model)
replaced by 407-111.316
407-111.316 Screw (PTFE or PP) for Syphon
407-1508.108 level sensor for organic issues
19 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-140.014 Set Seal ring for siphon and mixing compartment for organic samples
(Kalrez)
20 / 60
Consumables AAS
Analytik Jena AG
Order number Description
Burner-Nebulizer-System
(Ryton - MK)
407-111.837 Waste tube siphon (1,3m)
407-111.006 Inlet tube
0.8 mm x 1.4 mm with couple unit
(40 cm for manual work)
407-111.008 Inlet tube AS51S/AS52S (PTFE)
(cannula AS to nebulizer)
0.8 mm x 1.4 mm
50 cm
407-403.311 Apiezon-grease in tube
407-140.411 Replacement-set 1 for scraper
(Scratches, screws)
21 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-160.411 Replacement-set 2 for scraper
(1x plug plate, 3x screws, 3x nuts, 3x washers)
407-111.407 Mixing wing
407-111.401 Mixing chamber
contrAA 300: from S/N 1600346
contrAA 700: from S/N 161K0335
ZEEnit 700P: from S/N 150Z7P0191
novAA 350: from S/N AA1A0908056
407-111.475 Mixing chamber plugs
407-403.147 O-ring 8,5 x 1,8 for nebulizer
702-A63.625 Pack of 5 pieces cleaning wires
22 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.624 Pack of 50 pieces cleaning rods
407-111.865 Impact bead (N2O-FL-long/ceramic)
407-111.860 Impact bead (standard-short/ceramic)
407-111.001 Quartz tube for HPT burner head (5 cm slit length)
407-111.409 Knurled screw for mixing-chamber-parts
23 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.204 Cleaning part for burner acetylene/N2O (long version)
407-111.316 Screw (PTFE or PP) for Syphon
407-1508.108 level sensor for organic issues
407-143.021 Set sealing rings mixing-chamber-nebulizer-system
Set 0-ring mixing chamber
plug with 0-ring
0-ring 8.5 x 1.8 for nebulizer
407-111.402 Set o-rings for organic samples
24 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-111.005 Set o-rings mixing chamber
407-111.501 Nebulizer (graphite)
useable with mixing-chamber-nebulizer-system III (brown)
further spare parts
407-140.040 Waste bottle
25 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-110.499 Drip pan (novAA 300, 350,400 ; contrAA 300,700)
407-160.411 Replacement-set 2 for scraper
(1x plug plate, 3x screws, 3x nuts, 3x washers)
407-140.015 Sample table, complete
407-A63.601 Standard nebulizer - nebulizer rate 4..7 ml/min, complete
ZEEnit 700: to S/N 150Z70184 usable
novAA 400: to S/N 140V497 usable
novAA 400 F: to S/N 140F133 usable
novAA 310: 315/330BU to S/N 1101261 usable
contrAA 300: to S/N 1600022 usable
407-A63.605 Standard nebulizer - nebulizer rate 4..7 ml/min, complete
for all AAS-units produced from January 2006
allcontrAA 300/700, ZEEnit 700P, novAA 350
ZEEnit 700: from S/N 150Z70185 usable
novAA 400: from S/N 140V498 usable
novAA 400 F: from S/N 140F134 usable
contrAA 300: from S/N 1600023 usable
contrAA 700: from S/N 161K0335 usable
Spare Parts Autosampler
AS 51 / 52
26 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-232.358 Waste tube Tygon (1,5 m)
407-140.192 Cannula for intake tubing AS51 Pt/Rh
407-232.384 Tip guide part for AS51 without cannula
407-232.394 Pack of 50 pieces PP-sample cups with 18 ml
407-400.052 Pack of 100 pieces sample cups - medicine, 3 ml, conical
27 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-232.393 Pack of 50 pieces PP- sample cups, 8 ml
407-232.392 Sample hood
for AS 51/52
407-232.391 Sample tray 53 positions for cups with 18 ml, metal Teflon coated
407-140.031 Set -cannula AS52 covered (for intake-and dosing tubing / Pt/Rh) incl.
cannula tipguide
AS 51 s, AS 52 s
for serial number in format XX.XX.XX
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
28 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant
407-400.007 Sample tray 49 positions for cups with 30 ml, metal teflon coated
(replacement for old autosampler )
407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant
407-400.043 Sample tray 87 positions for cups with 15 ml, metal teflon coated,
(replacement for old autosampler)
407-140.032 Set -cannula AS52s covered (intake and dosing tubing Pt/Rh); incl.
Cannula tipguide
diameter: 0,5 cm
29 / 60
Consumables AAS
Analytik Jena AG
Order number Description
AS 51 s, AS 52 s
for serial number in format XXX.XXX and XXXXXXXXX
407-232.358 Waste tube Tygon (1,5 m)
407-402.599 Inlet Tube (Tube - Valve)
407-402.598 Inlet Tube (nebulizer - autosampler)
30 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-140.373 Inlet Tube (nebulizer - autosampler, PTFE)
407-402.568 Cap for glass-sample cups 22 ml, 50 pieces
407-402.928 Lid for glass-sample cups 40 ml, 30 pieces
407-400.354 Dosing unit 5 ml
407-403.159 Dosing unit 5 ml
for AS 52s from S/N 703801 (March 2007)
407-402.567 Glass-sample cups 22 ml, 50 pieces
31 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-402.927 Glass-sample cups 40 ml, 30 pieces
407-402.600 Cannula complete with guiding AS 51S
407-402.601 Set - cannula AS 52S complete
diameter: 0,53 cm
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
32 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-402.926 Pack of 30 pieces Sarstedt PP- sample cups with 50 ml
407-402.602 Sample tray cover
for AS 52s/51s
407-402.880 Sample tray 30 positions, 50 ml
407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant
407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant
33 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-232.379 PTFE Dosing tube ( bottle valve - cannula )
407-402.594 Tube fixing for autosampler arm
407-400.707 Wide neck bottle 2,000 ml (with cap)
other parts for Autosampler
34 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-230.067 Wide neck bottle 750 ml
407-233.912 Wide neck bottle 1,000 ml (with cap)
407-400.707 Wide neck bottle 2,000 ml (with cap)
Pump and Connecting Tubings
35 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A63.614 Intake tubing PTFE
d = 0,5 mm; with coupler, 42 cm
(recommended for manual operating)
702-A60.536 Tubing for siphon and waste bottle; 8 x 11,2; 1,3 m
tubings SFS 5
702-A61.210 Tubing set complete (tubing + y-piece)
407-140.828 Tubing set complete Teflon (tubing + y-piece)
36 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-232.274 Silicon tubing; 0,5 mm x 2,1 mm (intake tubing 500 mm)
702-A61.251 Silicon tubing; 0,8 mm x 2,4 mm; 700 mm
tubings SFS 6
407-140.329 Tube to nebulizer
37 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-140.328 Tube to sample or autosampler
407-140.327 Tube to supply bottle
Compressor
407-232.804 Input filter / intake filter
38 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-232.376 Special oil SJ27 (0.5 l)
407-232.800 Submicro filter 0.01 μm
HYDRIDE TECHNIQUE
Systeme HS 51, HS 52, HS 53, HS 55 until S/N 1190230
407-A65.206 Set tubing for reaction gas
(viton tubing for Hg, tygon tubing for hydride)
only for HS55
Cell unit
39 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A65.135 Drain tubing
702-A54.012 Quartz cell without windows
407-A65.204 Set of 2 pieces ring for quartz window
407-A65.203 Set of 2 pieces quartz window
407-A65.206 Set tubing for reaction gas
(viton tubing for Hg, tygon tubing for hydride)
only for HS55
Hg-Enrichment HS51 / HS 53
702-A65.036 Collar for passing of the heating wire
40 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-A65.03X Tube with gold collector with heating element
407-A65.031 Set of 6 pieces O-rings for Hg-enrichment unit
Batch-Module - Accessories for the discontinuous mode HS 51 / HS 53 / HS 55 until S/N
1190230
407-233.916 12 pieces pump tubing for reducing agent / Batch-mode,
Tygon, violett/violett; d = 2.06 mm; s = 0.80 mm
407-401.241 6 pieces pump tubings for reducing agent / waste
Ismaprene; violett/ violett; d = 2.06 mm
HS 55: (only for HS55/HS55A)
407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces
41 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A65.081 Dosing tubing PTFE, 1 x 2 mm, length 250 mm long
702-A65.063 Dosing tip, PTFE (only for use of SnCl2)
407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces
702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal
407-A65.022 Set O-rings for head
407-119.012 Set pump tubings with connectors and insert- and dosing tubing
42 / 60
Consumables AAS
Analytik Jena AG
Order number Description
Accessories for the continuous mode HS 51 / HS 53
407-233.909 12 pieces pump tubing for waste, tygon, violet/orange/violet d = 2.54
mm
407-233.907 6 pieces pump tubing for sample
Ismaprene gelb/gelb; d = 1.42 mm; s = 0.80 mm
407-233.906 6 pieces pump tubing for acid and reducing agent NaBH4
Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm
Hydridsystem: (only for HS60/HS60A)
407-A65.066 Tube set for waste
702-A65.141 PTFE tube with screw
702-A65.140 Reactor complete
43 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-A65.064 Set tubing coupling (1 piece)
407-170.087 Snap-in tube cassette
gas supply
702-A60.068 Pressure tubing for Argon, 5 m
702-A65.010 Gas input for Hg
general accessories
407-A65.040 Filling for gas liquid separator (only pointed flask)
44 / 60
Consumables AAS
Analytik Jena AG
Order number Description
702-A65.201 Replacement units for gas liquid separator (kaskade - new type)
407-A65.003 Replacement units for gas liquid separator (pointed flask for foaming
samples)
702-120.019 Hg-cleaning agent 25 g
407-233.912 Wide neck bottle 1,000 ml (with cap)
drying unit
702-A65.095 Separator
45 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-A65.019 Drying membran with adapter for HS 51, 52, 53, 55
407-233.865 Set of 10 pieces PTFE-collar, NS 10/19
407-233.864 Set of 10 pieces PTFE-collar, NS 14/23
702-A65.094 Drying vessel
702-A65.091 U-tube
702-A65.082 tubing viton, 5 x 8 mm, 2 m long
46 / 60
Consumables AAS
Analytik Jena AG
Order number Description
HYDRIDE TECHNIQUE
Systeme HS 60, HS 60A, HS 55 from S/N 5510100, HS 55A
407-401.241 6 pieces pump tubings for reducing agent / waste
Ismaprene; violett/ violett; d = 2.06 mm
HS 55: (only for HS55/HS55A)
407-233.906 6 pieces pump tubing for acid and reducing agent NaBH4
Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm
Hydridsystem: (only for HS60/HS60A)
407-170.531 Waste tube
47 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.052 Intake Tubing for acid and reducing agent
MFA (complete)
407-401.984 O-ring flange
407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces
407-170.590 Gas liquid separator
48 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-401.734 Gas tube 3 x 5 mm, 2 m
407-170.097 Amalgamation with heating unit
810-60051-0 Hg cell (tulip)
407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces
407-170.541 Sample aspiration hose
49 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.050 Sample inlet tube
(sample tube, pump tube, connecting tube 2er-Ventil)
HS 60: till S/N: 600615; 110V till S/N: 6005002
HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003
407-170.530 Pump/dosing tube for batch module
702-A54.012 Quartz cell without windows
702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal
50 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.535 Reactor tube (Loop - MFA) 50 cm
407-A65.204 Set of 2 pieces ring for quartz window
407-170.001 set quartz window contrAA 700, 2 pieces
--> recommended for contrAA 700
98% transmission
Replace article 170:001.00.
407-A65.203 Set of 2 pieces quartz window
407-170.087 Snap-in tube cassette
51 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.536 Drying tube (large)
not from
HS60A S/N 62A0162
HS60 S/N 600616
HS60A (110V) S/N 60A5004
HS60 (110V) S/N 6005003
HS 60: S/N: 600615; 110V till S/N: 6005002
HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003
407-170.543 Drying tube Hg - new
407-170.548 Drying-membrane hydrid - new
HS 60: from S/N: 600616; 110V from S/N: 6005003
HS 60 A: from S/N: 62A0162; 110V from S/N: 60A5004
52 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-401.735 Tygon tube 1000 mm
407-170.534 Connection tube 2-Valvegroup Reactor
407-170.538 Connection tube Reactor-Gas-Liquid separator
53 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.532 Connection tube Valvegroup Amalgamation unit
407-170.537 Connection tube cell
407-170.571 Reserve bottle reducing agent; 1,000 ml
407-170.167 Reserve bottle acid; 1,000 ml
54 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.528 Pre-drying tube (short)
HS60A till S/N 62A0161
HS60 till S/N 600615
HS60A (110V) till S/N 60A5003
HS60 (110V) till S/N 6005002
HS 60: till S/N: 600615; 110V till S/N: 6005002
HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003
HS 50
407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces
407-170.612 Holder for Quartzcell
407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces
702-A65.050 Quartzcell HS50
55 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.654 Reagent bottle with lid for HS50
702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal
407-170.600 Set window with ring
407-170.651 Connection tube to Quartzcell
HydrEA - TECHNIC
56 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-170.529 Adapter tube MPE
(HS50, HS55, HS55A, HS60, HS60A)
407-A65.905 Gas tube MPE 50
(HS51, HS52, HS53, HS55 bis S/N 1190230)
702-A65.006 Titan cannula
Accessories direct solid sampling
microbalance
407-400.545 Micro spatula
702-A60.701 Modified balance table
407-A60.701 V24-connecting cable to AAS
57 / 60
Consumables AAS
Analytik Jena AG
Order number Description
spare parts solid sampler
407-153.018 Tweezers titan top for SSA 6
407-153.019 Tweezers titan down for SSA 6
407-400.850 Sample magazine for SSA 51, SSA 61/ 61z
407-401.044 Connecting cable AAS - Solid sampler
407-400.380 Tongs for SSA 5
407-401.046 Tongs for SSA 6z
SSA 600
58 / 60
Consumables AAS
Analytik Jena AG
Order number Description
407-402.953 Rotary plate, 42 positions
Please notice that the rotary plate is without position label. Please order the
label with the article number 29-1100-176-10 separately.
407-900.001 Capillary hose (rinsing bottle - dispenser)
407-900.002 Capillary hose (rinsing bottle - tubing guide)
407-402.971 Upper tip, Graphit, 3 pieces
407-150.920 Lower tip, 1 piece, made of titanium
59 / 60
Consumables AAS
Analytik Jena AG
Order number Description
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using
original Analytik Jena components, spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.
Powered by TCPDF (www.tcpdf.org)
60 / 60
Consumables AAS
Analytik Jena AG
Back to start
analytikjena
Consumables
AFS
1 / 17
Order number Description
Hg-ANALYZER mercur
Tubings
407-401.241 6 pieces pump tubings for reducing agent / waste
Ismaprene; violett/ violett; d = 2.06 mm
407-233.906 6 pieces pump tubing for acid and reducing agent NaBH4
Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm
mercur: (SnCl2)
407-170.054 Waste tubing, complete
2 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.055 Waste tubing onto the outlet nozzle
407-170.060 Insert tubing for acid and reducing agent
(MFA with female screw)
407-401.734 Gas tube 3 x 5 mm, 2 m
3 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.064 Cell tubing (from 4-valve group to the cell)
407-170.541 Sample aspiration hose
407-170.050 Sample inlet tube
(sample tube, pump tube, connecting tube 2er-Ventil)
407-170.057 Reactor and connector tubing, 25 cm
incl. connectors (reactor loop)
4 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.535 Reactor tube (Loop - MFA) 50 cm
407-170.114 Tubing set
consist of:
- Sample tubing
- Pump tubing for acid and reducing agent, pack of 6 pieces
- Pump tubing for waste, pack of 6 pieces
- Connector tubing from reactor to GLS
- Reactor and connector/ tubing
- Connection tubing from reactor to double valve group
- insert tubing for acid and reducing agent
407-170.058 Connector tubing from reactor to GLS
407-170.056 Connection tubing from reactor to double valve group
5 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.066 Connection tubing between 4-valve group and gold collector, short
407-170.068 Connection tubing between 4-valve group and gold collector, long
Replacement units
170:136.11 activated carbon filter for gas outlet
407-170.196 Activated Carbon Filter for inlet gas
6 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.240 Gas-liquid separator
407-170.097 Amalgamation with heating unit
407-401.502 Hg-low pressure lamp
407-170.087 Snap-in tube cassette
407-170.063 Drying membrane
7 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.067 Predrying membran (between GLS and bubble sensor)
Consumables
407-140.040 Waste bottle
8 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.052 Intake Tubing for acid and reducing agent
MFA (complete)
407-170.088 Cleaning wire
407-401.072 Fuse type for 110 V (T6, 3 A/H)
407-401.973 Fuse type for 230 V (T3,15 A/H)
407-170.089 Storage bottle reducing agent; 1,000 ml
9 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-170.167 Reserve bottle acid; 1,000 ml
Spare Parts Autosampler
AS 51 / 52
407-140.192 Cannula for intake tubing AS51 Pt/Rh
407-232.394 Pack of 50 pieces PP-sample cups with 18 ml
407-400.052 Pack of 100 pieces sample cups - medicine, 3 ml, conical
407-232.393 Pack of 50 pieces PP- sample cups, 8 ml
10 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-232.392 Sample hood
for AS 51/52
407-232.391 Sample tray 53 positions for cups with 18 ml, metal Teflon coated
407-140.031 Set -cannula AS52 covered (for intake-and dosing tubing / Pt/Rh) incl.
cannula tipguide
AS 51 s, AS 52 s
for serial numbers in format XX.XX.XX
407-232.384 Tip guide part for AS51 without cannula
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
11 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant
407-400.007 Sample tray 49 positions for cups with 30 ml, metal teflon coated
(replacement for old autosampler )
407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant
407-400.043 Sample tray 87 positions for cups with 15 ml, metal teflon coated,
(replacement for old autosampler)
407-140.032 Set -cannula AS52s covered (intake and dosing tubing Pt/Rh); incl.
Cannula tipguide
diameter: 0,5 cm
12 / 17
Consumables AFS
Analytik Jena AG
Order number Description
AS 51 s, AS 52 s
for serial numbers in format XXX.XXX
407-232.358 Waste tube Tygon (1,5 m)
407-402.568 Cap for glass-sample cups 22 ml, 50 pieces
407-402.928 Lid for glass-sample cups 40 ml, 30 pieces
407-400.354 Dosing unit 5 ml
407-403.159 Dosing unit 5 ml
for AS 52s from S/N 703801 (March 2007)
13 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-402.567 Glass-sample cups 22 ml, 50 pieces
407-402.927 Glass-sample cups 40 ml, 30 pieces
407-403.227 Glass-Sample cups with lid, 12 ml, 50 pieces
for AS51s/52s (mercur)
407-402.600 Cannula complete with guiding AS 51S
407-402.601 Set - cannula AS 52S complete
diameter: 0,53 cm
14 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
407-402.602 Sample tray cover
for AS 52s/51s
407-402.880 Sample tray 30 positions, 50 ml
407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant
15 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant
407-232.379 PTFE Dosing tube ( bottle valve - cannula )
407-402.594 Tube fixing for autosampler arm
407-400.707 Wide neck bottle 2,000 ml (with cap)
other parts for Autosampler
16 / 17
Consumables AFS
Analytik Jena AG
Order number Description
407-230.067 Wide neck bottle 750 ml
407-233.912 Wide neck bottle 1,000 ml (with cap)
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using
original Analytik Jena components, spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.
Powered by TCPDF (www.tcpdf.org)
17 / 17
Consumables AFS
Analytik Jena AG
Back to start